49
the PIN Code (The default PIN Code is "0000"). Then
press the OK soft key.
4. Use the
or key to select a handset. If you
select the current handset or a non-existent handset, a
warning tone will sound.
5. Press the Select soft key to confirm, and the selected
handset will behave according to the Out Of Range
condition.
Flash Time
You can select to change the Flash time by the
following steps:
1. Perform steps 1 and 2 of previous paragraph.
2. Use the
or key to choose Flash Time
menu. Press the Select soft key.
3. The display shows the current setting. Use the
or key to select Flash-1(100ms for UK)
/Flash-2(270ms) , press the Save soft key.
ADVANCED FUNCTIONS
To Next Page
Loading...
