56
Selecting a Base
This function allows you to select a base from those
already registered to the handset. You can access the
options by scrolling the menu.
1. Perform steps 1 and 2 of paragraph "Setting
Alarm"p51.
2. Press the
or key to choose Select Base
menu, press the Select soft key.
3. You can use the
or key to select the base
you want, then press the Select soft key. If you select a
non-existent base, the handset will sound a warning
tone.
4. The display will show Selected BSX. Press the Select
soft key to confirm. A confirm tone will be heard.
HS Reset
This function allows you to reset the Handset settings to
the factory default.
1. Perform steps 1 and 2 of paragraph "Setting Alarm".
ADVANCED FUNCTIONS
To Next Page
Loading...
