55
2. Press the or key to choose Date & Time
menu, press the Select soft key.
3. Use the
or key to choose Date Format
or Time Format, press the Select soft key.
4. You can use the
or key to choose the
Date format (DD-MM/MM-DD) or the Time format
(12-Hour/24-Hour), press the Save soft key to save.
2. Setting date & time
1. Perform steps 1 and 2 of previous paragraph.
2. Press the
or key to choose Set Date or
Set Time menu, press the Select soft key.
3. Enter the current date/time by numeric keypad and
press the Save soft key to save and exit.
Notes:
• If you select 12-Hour, AM/PM will appear on the right
of the time in standby mode.
• At step 3 you need to enter the time in 24-Hour
format.
ADVANCED FUNCTIONS
To Next Page
Loading...
