75
confirm. Every time you press the key, the system
will announce the corresponding week date.
Note:
y If you remove the battery or pull out the adapter, you
need to set the week date again.
Remote Control (AMPLIDECT™285 only)
You can access many features of your answering
machine remotely from any touch tone telephone. A
four-digit security code (remote code) is required to
access the system and the factory default one is 0000.
To enter remote access:
1. Dial your telephone number from any touch tone
telephone.
2. When the Announce1/Announce2 starts to play, you
may enter the remote access mode by inputting the
remote code.
3. After you enter the remote code, the system will play
the menu of commands. You can then follow the
commands to operate.
Note:
y If you enter the remote code incorrectly the answering
machine will ask you to enter the code again. You are
then given two more attempts to enter the correct
remote code before the line is disconnected.
TAM FUNCTIONS(AMPLIDECT285™ ONLY)
To Next Page
Loading...
