74
This function allows you to reset the TAM settings to the
factory default.
1. Press the TAM soft key in Standby mode.
2. Press the
or key repeatedly to choose
TAM Setting, use the Select key to confirm.
3. Press the
or key to choose the TAM
Default, press the Select soft key. You will be prompted
to enter the PIN code.
4. Enter the PIN code (the default one is 0000), then
press the Reset soft key. If the PIN code is validated all
TAM settings will return to the factory default, otherwise a
warning tone will be heard and the settings will remain.
Result: After resetting, the TAM will return to Standby
mode.
Week Date Setting
Before each message is played, the week and time it was
received will be announced. You are able to use the base
to set the week date.
In the active mode (all lights on) press and hold the
key on the base until the current setting is announced.
Press the
key repeatedly to set, use the key to
TAM FUNCTIONS(AMPLIDECT285™ ONLY)
To Next Page
Loading...
