Gefen EXT-HD-DSMP - Page 46

42
PUSH MODE / PULL MODE
7. Under the pullSchedule tag, the pullRepeat attribute value can be set
to hourly or daily, or none. See page 51 for more information.
If the pullRepeat attribute is set to daily, set the time value under the
<daily> tag to the time which the Hi-Def Digital Signage Media Player will
connect to the FTP server and retrieve updated content.
If the pullRepeat attribute is set to hourly, set the time interval, under the
<hourly> tag, in which the Hi-Def Digital Signage Media Player will connect
to the FTP server and retrieve updated content. The minimum time interval
is one minute (00:01) when the pullRepeat attribute is set to “hourly”.
...
...
<pullSchedule>
<pullRepeatvalue=”hourly”/>
<none/>
<daily>
<timevalue=”20:00”/>
</daily>
<hourly>
<timevalue=”00:01”/>
</hourly>
</pullSchedule>
</pullCong>
...
...
NOTE: If the time interval is set to 00:00 when the pullRepeat
attribute is set to hourly, then the update process will not occur.
When set to “daily”, the time value can be set to “00:00” which
corresponds to 12 am midnight.