Gefen EXT-HD-DSMP - Page 55

51
SETTINGS.XML SUMMARY
PullScheduleConguration
Tag Name: <pullSchedule>
Description: Located within the <pullSchedule> opening and closing
tags. This section allows you to specify when content is
pulled on a daily or hourly basis.
Attributes: pullRepeat
  time(daily)
  time(hourly)
Example:
  If you want to only pull content on a daily basis, then set the
pullRepeat attribute to “daily” then set the timevalue
under the <daily> tag. Conversely, if you want to pull
content on an hourly basis, then set the pullRepeat
  attribute to “hourly” and set the timevalue under the
<hourly> tag.
In the example above, the pullRepeatvalue is set to
”hourly” and will pull from the server every 20 minutes.
This value can be changed by 1-minute increments.
If the pullRepeatvalue was set to “daily”, then
the Media Player would pull content each day at 10:00
am. Note that “daily” time values are based on a
24-hour clock.
To disable Pull mode, set the pullRepeat value to
“none”.
<pullCong>
...
...
...
 <pullSchedule>
 <pullRepeatvalue=”hourly”/>
 <none/>
 <daily>
 <timevalue=”10:00”/>
 </daily>
 <hourly>
 <timevalue=”00:20”/>
 </hourly>
 </pullSchedule>
</pullCong>