Gefen EXT-HD-DSWF - Creating a Simple Digital Signage Presentation

32
SIGNAGE MANAGER EXPRESS
Creating a Simple Digital Signage Presentation
This section will cover the process of creating a simple Digital Signage
presentation. In the following example, the Digital Signage Player will be
connected to the network using an Ethernet cable.
1. Connect to the network using Wi-Fi or connect an Ethernet cable from the
Ethernet jack of the Digital Signage Player to the network. Confi gure the
network settings of the Digital Signage Player, as required.
2. Launch the Signage Manager Express from the Start Menu or double-click
on the icon on the Windows Desktop.
3. After the Signage Manager Express launches, click the OK button on the
“Let’s get started” dialog.
Click the OK button to
dismiss the dialog