App 3-23
5. BACnet Object Properties
This section provides the predetermined configuration of the inverter. User can achieve the
optimizated situation at any necessary modification.
Refer to Table 4.1 for the property information of inverter objects and user can learn the inverter
messages from the inverter objects.
Refer to Table 4.2 ~ Table 4.7 for the related object information that inverter supports. User can
control/ read each object with the application requirements.
Table 4.1 – Inverter property list
Applocation_Software_Supported
Protocol_Services_Supported
{ readProperty , writeProperty , who is }
Protocol_Object_Type_Supported
{ Analog_Input , Analog_Output, Analog_Value
Binary_ Input, Binary_Output, Binary_Value,
To Next Page
Loading...
Need help?
General