2.5 Order number for KFM05a
2.5.1 Code definition
KFM05a
Power
0 special design
1 180 W asynchronous motor
2 310 W asynchronous motor
3 500 W asynchronous motor (with fan)
4 510 W asynchronous motor
Fieldbus
0 without (standard)
1 Profibus DP (on request)
2 CANopen
3 EtherCat (on request)
Brake
0 Without
1 Holding brake 24V dc
2 Holding brake 230V ac via grid
3 Emergency brake 230V ac via grid
4 Emergency brake 230V ac externally controlled
5 Holding brake 24V dc externally controlled
6 Holding brake 230V ac externally controlled
Power supply electronics
0 internal (standard)
1 DC /DC 24V dc
2 Safety relay (safe stop)
3 DC /DC 24V dc and safety relay (safe stop)
Functions
00 No I/O connection (control via fiedlbus)
11 Only enabling 24V / Relay ready
44 Analog input 1 / 2 switchable with S3 0 – 10V / 0 – 20mA
48 Analog input 1 / 2 switchable with S3 0 – 10V / 0 – 20mA,
Keypad via M12 bushing 8 pins
88 Analog input 1 / 2 switchable S3 0 – 10V / 0 – 20mA Analog output 1 0 – 5V,
Keypad via M12 bushing 8 pins
Housing
0 standard IP54 protection (metric cable bushing)
1 connector version IP54 protection (plastic , light version)
2 metric screwing IP65 protection (without shaft sealing)
3 connector version IP54 protection (metallic, heavy version)
4 Sub-D-connector on the right IP20 / IP54 protection
5 cable inlet IP20 protection
6 metric screwing, fieldbus over M12 connector/bushing
7 housing closed without drills, connection from customer e.g. cover plate
8 housing extended for options
9 customer-specific housing (from drawing)
SIEI-AREG GmbH
Gottlieb-Daimler-Straße 17/3
74385 Pleidelsheim Germany
Fon: +49 7144 89736 0
To Next Page
Loading...