2.6 Housing
2.6.0 Standard housing with IP54 metric screwing
The standard housing of the KFM05a has four metric holes for cable inlet:
1 x M20 and 3 x M16 thread are in the housing.
2.6.1 Standard connector housing with IP54 light plastic bushing
To facilitate rapid connection of the KFM05a, all ports are provided with plastic bushing in this
version. Light version
2.6.2 IP65 metric screwing without shaft sealing
This version of the KFM05a is additionally sealed to IP65. Since no shaft seal is provided, IP65
protection can only be achieved with built-on gear box.
SIEI-AREG GmbH
Gottlieb-Daimler-Straße 17/3
74385 Pleidelsheim Germany
Fon: +49 7144 89736 0
To Next Page
Loading...