6. Fault Messages and Fault Treatment
Open the alarm-menu with -button to display a possibly existing fault:
Here it is possible to display the last 64 fault messages (button “History”). The function „Reset
alarm” is not yet activated, it shows the message: „IPA undefined “.
Fault menu:
Following displays are possible:
Alarm No.Alarm description
1 (e1) fault cutoff overcurrent
2 (e2) fault cutoff overvoltage
3 (e3) fault cutoff temperature heatsink
4 (e4) fault cutoff temperature motor
5 (e5) fault cutoff under voltage
6 (e6) fault cutoff
7 (ec) warning temperature motor
8 (ed) warning under voltage
9 (ee) warning temperature heat sink
10 (ef) warning: amplifier is off
SIEI-AREG GmbH
Gottlieb-Daimler-Straße 17/3
74385 Pleidelsheim Germany
Fon: +49 7144 89736 0
To Next Page
Loading...