8.4.4 Positionierung (positioning)
Geschw. V1 (positioning speed 1, Hz)
Geschw. V2 (positioning speed 2, Hz)
Geschw. V3 (positioning speed 3, Hz)
Geschw. V4 (positioning speed 4, Hz)
Geschw. V_ref (speed homing, Hz)
Wartezeit T1 (dead time T1, s)
Wartezeit T2 (dead time T2, s)
Referenzpos. (reference position, Ink)
Position 1 (Position 1, Ink)
Position 2 (Position 2, Ink)
Position 3 (Position 3, Ink)
Position 4 (Position 4, Ink)
Position 5 (Position 5, Ink)
Position 6 (Position 6, Ink)
Position 7 (Position 7, Ink)
Position 8 (Position 8, Ink)
Position 11 (Position 11, Ink)
Position 12 (Position 12, Ink)
Position 13 (Position 13, Ink)
Position 14 (Position 14, Ink)
Position 15 (Position 15, Ink)
Position 16 (Position 16, Ink)
Position 17 (Position 17, Ink)
Position 18 (Position 18, Ink)
8.4.5 Fehlerspeicher (error memory)
Firmware Vers. (firmware version z.B. 42)
Modifikation (modification subgroup z.B. 0)
neu auslesen? (error readout EEPROM, J/N)
Fehler 0 (last error Fehler, time since reset, error code in hex)
Fehler 1 (prior error direction)
Fehler 2 (prior error direction)
Fehler 3 (prior error direction)
Fehler 4 (prior error direction)
Fehler 5 (prior error direction)
Fehler 6 (prior error direction)
Fehler 7 (prior error direction)
Fehler 8 (prior error direction)
Fehler 9 (prior error direction)
8.4.6 Datensicherung (data saving)
Savepara (save parameter, J/N [ to active set value to 7])
SIEI-AREG GmbH
Gottlieb-Daimler-Straße 17/3
74385 Pleidelsheim Germany
Fon: +49 7144 89736 0
To Next Page
Loading...