3. 2 Overview of the plugs (Light version)
3.2.1 Mains connection ST 1
Mains connection at ST 1 with connector of type PX0470 Bulgin and standard cable with A = 1,5
mm², e.g. H05VV-F1,5.
ST 1 Pin assignment:
L 1 Pin L Phase conductor
N Pin N Neutral conductor
PE Pin PE earth conductor
Choose a fuse according to the used cable, e.g. 16A for 1,5 mm² cable. Additionally the KFM05a
has to be grounded at the earth bolt with minimum 10 mm² cable.
3.2.2 Control connection ST2 digital signals
Control connection via ST 2 type P X0412 Bulgin.
Pin assignment:
Pin 1 : Input 1 (24V 10mA)
Pin 2 : Input 2 (24V 10mA)
Pin 3 : Input 3 (24V 10mA)
Pin 4 : Input 4 (24V 10mA)
Pin 5 : Input 5 (24V 10mA) (Enable)
Pin 6 : Common In
Pin 7 : Output 1 (50mA)
Pin 8 : Output 2 (50mA)
Pin 9 : Output 3 (50mA)
Pin 10 : Common Out
Pin 11 : +24V external supply / PLC +UB based on reference on pin 6
Pin 12 : +15V internal additional supply (100mA) based on reference on pin 6
SIEI-AREG GmbH
Gottlieb-Daimler-Straße 17/3
74385 Pleidelsheim Germany
Fon: +49 7144 89736 0
To Next Page
Loading...