14 : 2 positions with safety function (version 2)
15 : Door-function with torque limitation while closing and partially open position
Door-control via input OPEN, CLOSE, STOP. With In 4 a second Open Position can
chose (Partially Open). The door-width can be learned via special teach-in-function.
16 : Door-function with torque limitation while closing
Door-control via input OPEN, CLOSE, STOP. The door-width can be learned via special
teach-in-function.
(17 : Door-function with time-controlled closing-function (not yet implemented))
The door only has an OPEN-control, after an adjustable time the door closes. The door-
width can be learned via special teach-in-function.
(18 : Door-function with inputs OPEN / CLOSE, only OPEN and STOP (not yet
implemented))
The started door-actions are continuing, even if the input goes inactive, until the next input
command appears. With DIP-switch DIP 4 of the KFM05a this door-function can be
switched to the time-controlled closing-function (automatic operation as 17) without
changing the input wiring. The door-width can be learned via special teach-in-function.
A detailed description of the respective functions can be initiated in the configurator by clicking the
number or parameter and pressing F1. New functions are also shown and described there.
SIEI-AREG GmbH
Gottlieb-Daimler-Straße 17/3
74385 Pleidelsheim Germany
Fon: +49 7144 89736 0
To Next Page
Loading...