Gehl AL 540 - Tilting the Platform down

108 918496/GP0313
4. Securely close the cab doors (if appli-
cable).
5. Using the ROPS, cab frame, and/or
handles, manually tilt the platform
upward.
Note: The steering lock bar (W, Fig. 71)
can be inserted in bracket (E) to provide
additional leverage for tilting the plat-
form.
6. Engage tilt support (W, Fig. 72).
Tilting the Platform Down
1. Slightly lift the platform using the
steering lock bar (W, Fig. 71) to relieve
pressure on the tilt lock to allow it to
be disengaged.
2. Disengage the tilt lock (W). Carefully
lower the platform.
3. Install platform lock-down nuts, bolts
and washers onto the left front and left
rear (A and C, Fig. 69) of the plat-
form.
4. Close engine cover (D, Fig. 69).
C
Figure 70 – Platform Mounting
Hardware
A
Rear
Front
Figure 71 – Steering Lock
Bar/Platform Tilt Bracket
W
E
Figure 72 – Tilt Support Lock
W
AL 100
Series
AL 200/300/400/500 Series
https://tractormanualz.com/