82 918496/GP0313
4. Push the locking handles
(K, Fig. 44) inward and downward
until the attachment is locked onto the
hitch as shown.
5. Check that the attachment is securely
locked onto the hitch: the lip on the
attachment must be completely
engaged over the top of the hitch, and
the locking pins on the bottom of the
hitch must be fully engaged down into
the attachment.
Check that attachments are securely fastened
to the hitch before working, or serious injury or
death could result.
6. Perform “Engine Start” on page 67.
All-Tach
®
System Hitch Disconnection
1. Lower the attachment to the ground.
See “Multi-purpose Joystick” on
page 78.
2. Turn off the engine. Move the multi-
purpose joystick several times in all
directions to depressurize the hydrau-
lic system.
3. Pull the locking handles upward until
the pins disengage from the attach-
ment (Fig. 45) Perform “Engine Start”
on page 67.
Figure 44 – Standard All-Tach
®
System Hitch Locked
K
Figure 45 – Standard All-Tach
®
System Hitch Unlocked
https://tractormanualz.com/
To Next Page
Loading...
