ROPS/FOPS
The ROPS/FOPS (Roll Over/Falling Object Protective Structure) is designed
to provide protection for the operator from falling objects and in case the
loader tips or rolls over, provided the operator is secured inside the ROPS by
the seatbelt and restraint bar.
Never operate the loader with the ROPS removed or
locked back.
Parking Brake
This skid loader is equipped with a
spring-applied hydraulic-release parking
brake. The parking brake engages when the
operator lifts the restraint bar, leaves the
operator’s seat or shuts off the engine. The
brake can also be applied manually by using
the switch located on the right control panel of
the ROPS. The red indicator on the switch
lights when the parking brake is applied.
Horn
Rear Window Emergency Exit
The ROPS rear window has three
functions: noise reduction, falling objects
barrier and emergency exit.
To use the emergency exit, pull on the
yellow warning tag at the bottom of the
window and remove the seal. Push out the
window and exit.
908268/BP0904 18
WARNING
Fig. 2: Parking Brake Switch
Fig. 3: Rear Window Emergency
Exit
1. Pull Tag
To Next Page
Loading...
