11
BASIC PROGRAMMING
BASIC PROGRAMMINGBASIC PROGRAMMING
BASIC PROGRAMMING
PROGRAMMING TIPS
Programming on the ET-6800 can be accessed through the P1 & P2 positions on
the control lock.
We strongly recommend users not to access the P2 position unless trained by a
suitable engineer. This function has been reserved for engineer features.
The P1 position will allow basic changes to the system, such as PLU price
changes, Clerk name changes etc.
A separate overlay sheet may be required. This contains the relevant
programming buttons required to program the cash register.
STRT = To choose a function
SLCT = To select an option from within a function
INPUT = To confirm a programming choice
DSGN = Go to a programming number
The programming overlay sheets (supplied with the ECR) or for reference can be
viewed on pages 14 & 15
The following table shows how to print out various current programming data
from the ECR.
Confirmation Type Procedure
PLU Names P1 - 3 - STRT - SLCT - SLCT - PRINT
PLU Prices P1 - 3 - STRT - SLCT - SLCT - SLCT - PRINT
Dept Names P1 - 2 - STRT - SLCT - PRINT
Clerk Names P1 - 8 - STRT - SLCT – SLCT – SLCT - PRINT
Clerk Pin Numbers P1 - 8 - STRT - SLCT - PRINT
To Next Page
Loading...
