Geller ET-6800 - The Control Lock

8
The ‘V’ position is used to void previously made
incorrect sales entries.
The ‘L’ position locks the ECR
GETTING STARTED
GETTING STARTEDGETTING STARTED
GETTING STARTED
THE CONTROL LOCK
L
R
X1
V
Z1
X2
Z2
P2
P1
The ET-6800 should be used
to make sales with the key in the ‘R’ position.
The P1 and P2 positions
give access to programming operations.
The X1 and X2 positions are used to read sales
reports. The Z1 and Z2 positions are used to read
and reset sales information