Gemalto Prox–DU - Supported Contactless Card Types; Contact Interface Slot Details

Short Form Specification
Prox–DU & Prox–SU
www.gemalto.com
DOC119224A Public Use Page 17/37
The characteristics for the contactless interface are as follows:
• Contactless type:
o ISO14443-A Memory cards (MIFARE
®
)
o ISO14443-A Microprocessor cards (T=CL)
o ISO14443-B Microprocessor cards (T=CL)
o Automatic scan between ISO14443-A and ISO14443-B
• Contactless baud rate:
o 106 kbps - 212 kbps - 424 kbps - 848 kbps
• Contactless protocol:
o MIFARE
®
classic
o ISO14443-4 (T=CL)
• Contactless commands:
o Compliant with PC/SC V2.0 Part 3 Revision 2.01.09 specifications
Contact interface
The contact interface is available with the Prox–DU and the Prox–SU and is composed of a
smart card connector with a smart card slot located in the front cabinet for the Prox–DU and
located inside the casing for the Prox–SU.
Figure 15 – Contact card slot (Prox–DU and Prox–SU)
The characteristics for the contact interface are as follows:
• Card type:
o Asynchronous (Microcontroller based)
• Card size:
o ID-1 for the Prox–DU (full size form factor)
o ID-000 for the Prox–SU (SIM/SAM form factor)
Figure 16 – ID-1 and ID-000 card size
54 mm x
85.6 mm
54 mm x
85.6 mm
25 mm x
15 mm
25 mm x
15 mm