Gemalto Prox–DU User Manual

Short Form Specification
Prox–DU & Prox–SU
www.gemalto.com
DOC119224A Public Use Page 7/37
Introduction
This manual provides short information on the use of the Prox–DU and the Prox–SU dual
interface (contactless and contact) USB smart card reader/writer.
This document is applicable to following reference:
Model Reference Comments
Prox–DU HWP118184
Dual interface USB smart card reader
Contact & contactless
Prox–SU HWP118185
Contactless interface USB smart card reader
With optional SIM/SAM slot
Prox–DU
with stand
HWP118830 Prox–DU with a stand for vertical use
Prox–SU
with stand
HWP118831 Prox–SU with a stand for vertical use
Table 1 – Dual interface USB smart card reader/writer models
For information on how to use the smart card reader/writer, please refer to the “Reference
Manual” document.
For information on installation, please refer to the “Installation Guide” document.
Who Should Read This Book
This manual is designed for users of PC/SC smart card application.
Conventions
Byte Numbering
A string of n bytes consists of n number of concatenated bytes: Bn…B3…B0.
Bn is the most significant byte and B0 is the least significant byte:
A string of
n bytes
Bn Bn-1 - - - B2 B1 B0
Contact Our Hotline
If you do not find the information you need in this document, or if you find errors, contact the
Gemalto hotline at http://support.gemalto.com/
.
Please note the document reference number, your job function, and the name of your
company. (You will find the document reference number at the bottom of the document.)

Gemalto Prox–DU Specifications

General

Brand	Gemalto
Model	Prox–DU
Category	Card Reader
Language	English