EasyManua.ls Logo

Gemini CDMP-1400 - User Manual

Gemini CDMP-1400
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
In the USA: if you experience problems with this unit,
call 732-346-0061 for GCI Technologies
customer service. Do not attempt to return
this equipment to your dealer.
Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the
vendor. GCI Technologies Corp. shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be re-
produced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without
the express written permission of GCI Technologies Corp. It is recommended that all maintenance and service on this product is performed by GCI Technologies Corp. or its authorized agents. GCI
Technologies Corp. will not accept liability for loss or damage caused by maintenance or repair performed by unauthorized personnel.
Worldwide Headquarters
1 Mayeld Ave, Edison, NJ 08837, USA
Tel: (732) 346-0061 • Fax: (732) 346-0065
Latin America, Mexico, and Caribbean • GCI Technologies
8320 NW 68 Street
Miami, FL 33166, USA
Tel: (305) 592-4746 • Fax: (305) 592-4746
UK • GCI Technologies
44 The Brambles Enterprise Centre, PO7 7TH Waterlooville, UK
Tel: 087 087 00880 • Fax: 087 087 00990
Spain • GCI Technologies S.A.
Caspe, 172 - 1º A
08013 Barcelona, Spain
Tel: 34 93 436 37 00
Fax: 34 93 347 69 61
France • GCI Technologies France S.A.R.L
2bis, rue Léon Blum, 91120 Palaiseau, France
Tél: + 33 1 69 79 97 70 • Fax: + 33 1 69 79 97 80
Germany • GCI Technologies GmbH
Lerchenstraße 14, 80995 München, Germany
Tel: 089 - 319 019 8 - 0 • Fax: 089 - 319 019 8-18
© GCI Technologies Corp. 2009 All Rights Reserved.
Question and Answer IconNeed help?

Do you have a question about the Gemini CDMP-1400 and is the answer not in the manual?

Gemini CDMP-1400 Specifications

General IconGeneral
Total Harmonic Distortion<0.05%
Output Level2.0 V RMS
Dimensions482 x 272 x 89 mm
Weight3.4 kg
Pitch Control+/- 12%
Frequency Response20 Hz - 20 kHz
Power SupplyAC 115/230V, 60/50Hz
TypeCD Player
Playback FormatsCD, CD-R
Channels2

Summary

Warnings

Safety Precautions

General safety guidelines for operating the device to prevent injury or damage.

Diagrams

Front Panel Diagram

Illustration of the front panel controls and indicators with numerical labels.

Rear Panel Diagram

Illustration of the rear panel connections and outputs with numerical labels.

Introduction

Getting Started and Contents

Information on product congratulations, unpacking, and included accessories.

Product Features

Highlights the main functionalities and compatibility of the CDMP-1400 player.

Connections and System Control

Power and Rear Connections

Details on the main power input and rear panel audio output connections like XLR and RCA.

Front Panel Controls Overview

Explanation of front panel buttons like Power, Eject, Disc Slot, and initial navigation controls.

Playback and Navigation Controls

Covers controls for searching, playback (Play/Pause), setting cue points, and time display.

Mode and Pitch Adjustments

Details on setting loops, adjusting pitch, and selecting playback modes like Single/Continuous.

USB, Volume, and BPM Functions

Explains USB connectivity, USB/CD selection, volume controls, and BPM measurement.

Specifications

General Specifications

Provides general technical details including dimensions, weight, and power supply.

Audio Specifications

Lists audio performance parameters like sampling rate, frequency response, and signal-to-noise ratio.

Product Registration

Online Product Registration

Instructions and form for registering the product online or via mail for prize giveaways.

Support and Warranty

Warranty Information

Details the limited warranty coverage, exclusions, and terms for product defects.

Return and Repair Process

Outlines the procedure for returning a product for warranty or repair service.

Regional Support Contacts

Provides contact details for customer service and repair centers in different countries.

Related product manuals