Generac Power Systems PWRcell X7600 Series User Manual

Operation
Owner’s Manual for Generac PWRCell Inverter 13
4. See Figure 3-9. Highlight Enable and press the
center button.
009971
Figure 3-9. Enabling and Disabling Devices (2 of 3)
5. See Figure 3-10. Arrow right and press the center
button to select Confirm.
009972
Figure 3-10. Enabling and Disabling Devices (3 of 3)
NOTE: Per UL1741, the Generac PWRcell Inverter may
wait five minutes or longer before beginning to export
power after the inverter has been enabled.
Mod. Settings Menu
Most REbus devices have user-adjustable parameters,
such as setpoints for charge, startup voltage, or PLM
channel. See Table 3-4 for available inverter device
settings.
To access user-adjustable parameters:
1. Use the left and right arrows to navigate to the
desired device page.
2. See Figure 3-11. Highlight Mod. Settings and
press the center button to select.
010234
Figure 3-11. Internet Device Page
NOTE: After selecting Mod. Settings it may take a
moment for the settings to load.
3. See Figure 3-12. Use the up and down arrows to
scroll through available settings.
4. Highlight the desired setting and press the center
button to select.
5. Use the up and down arrow keys to adjust the
setting.
NOTE: Press the center button to deselect a setting at
any time
009975
Figure 3-12. Mod. Settings Menu (2 of 3)
6. See Figure 3-14. To save the settings, highlight
Commit and press the center button.
00997
6
Figure 3-13. Mod. Settings Menu (3 of 3)
0099
7
Figure 3-14. Mod. Settings Menu (3 of 3)

Generac Power Systems PWRcell X7600 Series Specifications

General

Brand	Generac Power Systems
Model	PWRcell X7600 Series
Category	Inverter
Language	English