Models FL3100/3101
iii
Periodic System Verification
The following system verifications should be performed at least annually:
Verify wiring, terminal connections and stability of mounting for all integral safety
equipment including, but not limited to:
• Power supplies
• Control modules
• Field detection devices
• Signaling / output devices
• Accessories connected to field and signaling devices
Proper system operation should be verified by performing a full, functional test of
all component devices of the detection system, ensuring that the proper levels of
alarming occur.
Fault/Malfunction circuit operation should be verified.
Maintenance intervals should be independently established through a
documented procedure, including a maintenance log maintained by plant
personnel or third party testing services.
To Next Page
Loading...
