07
7-31
WARNING
Take the following precautions when
using Blind-Spot Safety system:
ś For your safety, change the Settings
after parking the vehicle at a safe
location.
ś If any other system’s warning
message is displayed or audible
warning is generated, Blind-Spot
Safety system’s warning message
may not be displayed and audible
warning may not be generated.
ś You may not hear the warning sound
of Blind-Spot Safety system if the
surrounding is noisy.
ś Blind-Spot Safety system may not
operate if the driver applies the
brake pedal to avoid collision.
ś When Blind-Spot Safety system
is operating, braking control by
the system will automatically
cancel when the driver excessively
depresses the accelerator pedal or
sharply steers the vehicle.
ś During Blind-Spot Safety system
operation, the vehicle may stop
suddenly injuring passengers and
shifting loose objects. Always have
the seat belt on and keep loose
objects secured.
ś Even if there is a problem with Blind-
Spot Safety system, the vehicle’s
basic braking performance will
operate normally.
ś Blind-Spot Safety system does not
operate in all situations or cannot
avoid all collisions.
ś Blind-Spot Safety system may warn
the driver late or may not warn the
driver depending on the road and
driving conditions.
ś Driver should maintain control
of the vehicle at all times. Do not
depend on Blind-Spot Safety system.
Maintain a safe braking distance, and
if necessary, depress the brake pedal
to reduce driving speed or to stop
the vehicle.
ś Never operate Blind-Spot Safety
system on people, animal, objects,
etc. It may cause serious injury or
death.
WARNING
The brake control may not operate
properly depending on the status of
ESC (Electronic Stability Control).
There will only be a warning when:
- The ESC (Electronic Stability Control)
warning light is on
- ESC (Electronic Stability Control) is
engaged in a different function
To Next Page
Loading...
Need help?
General
