Post Dispense Delay - when the dispense head is retracted after a vend.
4.5.3 Disable Selections
This sub menu allows the engineer to disable individual or all drink selections if
necessary. With Disable Selections highlighted, press the ↵ (Edit) key to access
the menu.
1. Upon entry into the menu the LCD will
display the screen as shown. Using the
▲
(up) or ▼ (down) keys, scroll through the
menu until the required drink selection is
highlighted. Pressing the ↵ (Edit) key will
select the drink, indicated by an X
appearing in its adjacent box.
2. If necessary continue until all required drink selections have been checked.
Pressing the X (Exit) key will move back to the Product Configuration
screen and save the new parameters to the machines memory.
N.B. Pressing the START/? key on the drink selection keypad will check all boxes
if empty, disabling all drink selections or clear all boxes if previously checked.
3. On returning to standby mode the selection button light will be
extinguished next to any drink selections that have been disabled,
indicating to the customer that the drink choice is un-available.
4.5.4 SureVend™
This menu enables the SureVend™ cup delivery sensor to be turned on or off.
SureVend™ Overview:
1. SureVend™ ensures that a cup is always available in the cup station before
any money is collected or product delivered. The sensing system is a beam
of infra-red light across the cup station that is broken by a cup as it falls
into position from the cup drop unit, or by a customer placing his own
mug in the dispense area.
2. The SureVend™ software monitors the
cup station sensor during the time that the
cup ring is operated and for three seconds
afterwards. If a cup is not detected the
software will then attempt to drop a
second cup and if necessary, a third time.
After three failed vend attempts the cup ring is placed temporarily out of
service. The machine will beep once and the LCD will display the Vend
Failed message (if set to Pay Vend mode).
Technical Manual
38