To Next PageTo Next Page
Need help?Do you have a question about the Genevac HT-12 and is the answer not in the manual?
Critical guidelines for balancing, loading, and securing sample holders and tubes within the rotor.
Instructions on balancing swings and sample holders for stable rotor operation.
Detailed instructions for inputting and configuring run parameters like sample type, volume, solvent, and temperatures.
Guidance on using SampleGuard for temperature control, probe placement, and calibration.
Instructions for operating the condenser, including defrost and drain procedures.
Step-by-step guide for performing a typical evaporation run, including data input.
Strategies to avoid common issues like condensation and TFA creep.
Troubleshooting common general issues like system stopping, run time, and shutdown alarms.
Troubleshooting temperature-related issues like exceeding limits or lamps not switching on.
Troubleshooting pressure-related issues like failure to reach full vacuum.
Troubleshooting condenser issues such as not reaching temperature.
Troubleshooting electrical problems like no power to the system or components.
Critical safety warning regarding earthing the system and installation categories.
General| Description | The Genevac HT-12 is a high-throughput evaporator designed for rapid and efficient solvent removal from multiple samples. |
|---|---|
| Applications | Drug discovery |
| Sample Format | Microplates, vials, and tubes. |
| Capacity | Up to 12 microplates or equivalent number of vials/tubes. |
| Vacuum | Integrated vacuum system |
| Solvent Compatibility | Compatible with a wide range of solvents including water, methanol, and DMSO. |
| Sample Volume Range | From a few microliters to several milliliters per sample. |
| Power Supply | 220-240V, 50/60Hz |
| Temperature Range | Ambient to +80°C (Precise temperature control) |
| Evaporation Capacity | High evaporation rates for fast sample processing. |
