Genevac HT-8 & HT-12 Series II Evaporating Systems
Page 46 of 64 04-4541 Issue 1-9 – June 2008
7.4 Additional equipment
There may be future applications for which your current range of sample holders are not adequate.
The following accessories are just an example of the many ways in which Genevac can assist you in
developing your system for the future.
For further information or to discuss any ideas you may have, please call Genevac Sales.
• All sample holders are of a solid aluminium construction and black anodised to improve heat
absorption
• Maximum contact area provide good physical support, optimum heat transfer and even heat
distribution
• Solid aluminium tube holders provide even heat distribution for uneven drying loads
FastStack for shallow well plates
Side Bridge
Medium length tube holder
Short tube holder
FastStack for deep well plates
Flask holder
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
