Genexis Platinum - Platinum Configuration; Accessing the Web Interface; Login Credentials and Security; Router Settings Customization

8
5. Conguring your Platinum
Note: By default the router is configured correctly for
most home networks. Changing the configuration is
only advised for advanced users and might interrupt
your connection. Please refer to page 3 on how to
reset the router settings back to the factory default
settings.
Step 1:
• Launch the web browser on your computer and
enter http://router or the default IP address
http://192.168.1.254 in the address field. This
address is also printed on the label on the back
of your Platinum.
Step 2:
• Log in as ‘admin’, using the default password
‘admin’.
It is strongly advised to change the password
after you logged in for the first time.
Step 3:
• Configure the router to the desired configura-
tion. Read the help text for additional informa-
tion about this setting.