English
23
zoom and a message about digital zoom will appear on the left side of the LCD Monitor.
8. Slide down and up the Macro Button on the side of camera to enable the Macro
photography.
After you selected the Macro Mode, the Macro LED located on the top of the LCD
monitor will be green.
※ If the low batteries power icon appears on the LCD Monitor, please change new
batteries immediately to keep the camera operating normally.
※ If the "Memory is not enough!" warning message appears on the LCD monitor, it
means the memory card is full, remove the memory card and insert a new one
immediately.
6-3 Play Mode
In Play Mode, users can review the recorded still and movie pictures. To review the
pictures, perform the following:
1. Turn the Mode Dial to Play Mode .
2. Using the lens cover located on the front of the camera to turn on the camera.
After you turn on the camera, the last image recorded appears on the LCD
monitor.
3. Press the arrow buttons / on the MENU/ENTER Button to review the
previous and back image.
4. Press the button on the center of the MENU/ENTER Button to enable
the "Delete", "Slideshow" and "DPOF" functions.
5. Press the arrow button on the MENU/ENTER Button to enter the
selected menu items.
6. Press the arrow button on the MENU/ENTER Button to exit the menu.
※ The DPOF function can only be operated with the memory card inserted.
※ If there is no image stored in the internal memory or on the memory card, a “No
picture” message pops up on the LCD Monitor in the Play Mode.
※ Press the Mode Display Button to review the images when the camera is off.
Press the Mode Display Button again and it will turn off the LCD Monitor.
To Next Page
Loading...
