English
8
(1) Image resolution
(2) Image quality
(3) Current working mode
(4) Memory card loaded symbol
(5) Possible number of shots
(6) Self-timer photography
(7) White balance display
(8) Morning/Afternoon display
(9) Time display
(10) Date display
(11) Remaining battery power
(12) Zoom lever
(13) Flash status
3-3 Power Supply
●Slide the lens cover toward left gently and turn on the camera after two beeps
sound.
●Slide the lens cover toward right gently and turn off the camera.
●Use the lens cover located on the front of the camera to turn on/off camera. After
you turn on the camera, the red LED will be blinking, and then the last image
recorded appears on the LCD monitor.
※If no operation is carried out for a fixed amount of time (default: about 1 minute),
the power is turned OFF to prevent battery wear. This is called "Auto Power
To Next Page
Loading...
