Need help?Do you have a question about the Genmitsu 3020-PRO MAX V2 and is the answer not in the manual?
General| Model Name | 3020-PRO MAX V2 |
|---|---|
| Body Material | All Metal |
| Control Board Compatibility | GRBL 1.1h |
| MCU | 32-Bit |
| Stepper Driver | TB67S109 |
| X, Y,Z Axis Motor | NEMA 17, 47mm |
| Max Speed | 2000mm/min |
| Running Accuracy | ≤ ±0.1mm |
| Repositioning Accuracy | ≤ ±0.1mm |
| CAM Software | Software Based on GRBL Firmware, e.g. Candle, UGS |
| Spindle Power | MAX 300W 10000RPM |
| Power Supply | 48V 8.3A |
Weight and Dimensions| Work Area | 300 x 205 x 78mm (11.81” x 8.07” x 3.07”) |
|---|---|
| Overall Dimensions | 484 x 394 x 388mm (19.04” x 15.49” x 15.28”) |
To Next Page
