4.
Hang the rear window down so it hangs outside
of
the
vehicle.
5.
Push the clip on the driver’s side of the rear window
frame (see illustration above) and pull the bar
rearward. Then slide the bar
to
the left to release the
passenger’s side.
Reverse the steps to install the rear window. Make sure
that the window is completely closed before driving.
Removing
and
Installing the Side Window
To remove the side window:
1.
Unfasten the Velcro@ on the top and rear quarter of
2.
Unzip the zipper almost all the way, leaving about
the side window.
3
inches
(8
cm)
of
it
still zipped and unfasten the
Velcro on the inside of the window.
3.
Release the plastic strip sewn along the bottom edge
of
the window by gently pulling down and out. Then
release the plastic along the front edge
of
the
window by
pulling
it forward and out.
2-48
To Next Page
Loading...
Need help?
General
