Front
Axle
When to Check and Change Lubricant
Refer
to
the Maintenance Schedule to determine how
often to check the lubricant and when to change it. See
“Periodic Maintenance Inspections” and “Scheduled
Maintenance Services” in the Index.
How
to Check Lubricant
If the differential
is
at
operating temperature (warm),
add enough lubricant to raise the level to the bottom of
the filler plug
hole.
If the differential is cold, add enough lubricant to raise
the level to 1/2 inch
(I
2
mm)
below
the
filler plug hole.
What to
Use
Refer to the Maintenance Schedule to determine what
kind
of
lubricant to use. See “Recommended Fluids and
Lubricants”
in
the Index.
Engine
Coolant
The following explains your cooling system and how to
add coolant when it is low. If you have a problem with
engine overheating, see “Engine Overheating” in
the Index.
If
the
level
is
below the bottom
of
the filler plug hole,
you’ll need to add some lubricant.
A
50/50
mixture of water and the proper coolant will:
0
Give freezing protection down to
-33°F (-36°C).
0
Give boiling protection
up
to
258°F
(125°C).
0
Protect against rust and corrosion.
0
Help keep the proper engine temperature.
Let the warning lights and gages work
as
they should.
6-23
I
To Next Page
Loading...
Need help?
General
