Resuming
a
Set Speed
Suppose you set your cruise control at a desired speed
and then you apply the brake. This, of course, shuts off
the cruise control. But you don’t need to reset it.
Once you’re going about
25
mph
(40
km/h) or more,
you can turn the lever to
RESUME/ACCEL for
about one second.
Increasing Speed While Using Cruise Control
There are two ways to go to
a
higher speed. Here’s
the first:
Use the accelerator pedal to get to the higher speed.
Turn the lever to COAST/SET and release. Take
your foot off the accelerator pedal. You’ll now cruise
at the higher speed.
Here’s the second way to
go
to a higher speed:
0
Turn the lever to RESUME/ACCEL.
Hold the lever at RESUMEIACCEL until you get up
to the speed you want, then release the lever.
Reducing Speed While Using Cruise Control
I
To
reduce your speed, turn and hold the lever in the
COAST/SET position until you reach the lower speed
You’ll
go
right back to your chosen speed and stay there.
you
want, then release the lever.
2-36
To Next Page
Loading...
Need help?
General
