2.
Disconnect the bulb from its socket by twisting and
then pulling the bulb out.
3.
Reverse the steps with a new bulb.
Center High-Mounted Stoplamp, Four
Door Models
1.
Open the rear door.
2.
Remove the two clips and the center high-mounted
3.
Remove the bulb socket from the lens and remove
stoplamp housing from the lamp.
the bulb from the bulb socket.
4.
With a new bulb, reverse the steps.
Center High-Mounted Stodamp,
Convertible Models
1.
Remove the two screw and the center high-mounted
stoplamp lens from the housing.
2.
Remove the bulb socket from the lens and remove
the bulb from the bulb socket.
3.
With a new bulb, reverse the steps.
Dome Lamp
1.
Gently pry the dome lamp lens from the lamp
2.
Remove the old bulb and replace with a
new
bulb.
3.
Snap
the
dome lamp lens back into the dome
assembly with
a
flat-bladed screwdriver.
lamp assembly.
6-39
To Next Page
Loading...
