Long
Tripmighway Maintenance Schedule
I
30,000
Miles
(50
000
km)
(Continued)
0
Check engine idle speed and adjust it to
underhood label specifications.
An Em.ission Control Senice.
(See footnote?.)
0
Inspect propeller shafts and u-joints for
looseness and damage
(or
every
I5
months,
whichever occurs first). Inspect more
frequently if used off-road or for pulling a
trailer. Tighten u-joint flange bolts
if necessary.
DATE SERVICED
BY
ACTUAL MILEAGE
37,500
Miles
(62
500
kr:)
0
Change engine oil and filter (or every
7.5
months, whichever occurs first).
An
Emission
Control
Service.
0
Rotate tires. See “Tire Inspection and
Rotation” in the Index for proper rotation
pattern and additional information.
(See footnote
+.)
0
Inspect the locking front hubs (if equipped)
for
correct operation (or every
3
months,
whichever occurs first). Repair or replace
if necessary.
7-38