6.
Find the support bar on the bottom of the seat. This
7.
Pull the inner end of the support off of the seat
bar keeps the rear seat from unfolding.
bracket and swing it down.
To
unfold the seat:
Keep your hands, safety belts and other objects away
from where the seat will rest.
1.
8.
Attach support bar to the floor bracket.
2.
3.
Pull the support bar out of the
floor
bracket and
swing it up and toward the bottom of the seat.
Push and secure the support
bar
into the bracket on
the bottom
of
the seat.
Slowly pull the seat down
to
the
floor.
The seat
should latch into place. Pull up
on
the bottom
of
the
seat to be sure it is locked into position.
1-8
To Next Page
Loading...
