9.
The other end of the negative
(-)
cable doesn’t go
to the dead battery. It goes to a heavy unpainted
metal part on the engine of the vehicle with the
dead battery. Attach the cable at least
18
inches
(45
cm) away from the dead battery, but not near
engine parts that move. The electrical connection is
just as good there, but the chance
of
sparks getting
back to the battery is much less.
10.
Now start the vehicle with the good battery and run
the engine for a while.
11. Try to start the vehicle with
the
dead battery.
If
it
.12.
Remove the cables in reverse order
to
prevent
won’t
start
after a few tries, it probably needs service.
electrical shorting. Take care that they don’t touch
each other or any other metal.
A. Heavy Metal Engine Part
B. Good Battery
C.
Dead Battery
5-7
I
To Next Page
Loading...
