6.
Start the engine and let it run until you can feel the
upper radiator hose getting hot. Watch out for the
engine fan.
filler neck may be lower.
If
the level
is
lower, add
more of
the
proper coolant mixture through the
filler neck until the level reaches the base of the
filler neck.
7.
By this time, the coolant level inside the radiator
8.
Then replace the pressure cap. At any time during
this procedure
if
coolant begins to flow out
of
the
filler neck, reinstall the pressure cap. Be sure the
arrows
on
the pressure cap line up like this.
5-22
To Next Page
Loading...
