How
to
Check
Because this operation can be
a
little difficult, you
may choose to have this done at your Geo dealership
Service Department.
If you do it yourself, be sure to follow all the
instructions here, or you could get a false reading.
NOTICE:
Too
much or too little fluid can damage your
transmission.
Too
much can mean that some
of
~
the fluid could come out and fall on hot engine
'
parts or exhaust system parts, starting
a
fire. Be
~
sure to get an accurate reading if you check your
~
transmission fluid.
~
Check the fluid level only when your engine
is
off,
the
vehicle is parked on
a
level place and the transmission is
cool enough for you
to
rest your fingers on the
transmission case.
Then, follow these steps:
1.
Remove the filler plug.
2.
Check that
the
lubricant level is up to the bottom
of
the filler plug hole.
3.
If
the fluid level
is
good, install the plug and be sure
it
is
fully
seated.
If
the fluid level is low, add more
fluid
as
described in the next steps.
6-20
To Next Page
Loading...
Need help?
General
