Prepay (prepayment meters only)
27
Prepay (prepayment meters only)
Restore supply
On some meters, the electricity supply can be enabled (restored)
from the Trio without having to press a button on the meter. If you
meter supports this capability, it will automatically appear in the
prepay menu when the supply is ready to be enabled.
Unfortunately, for safety reasons, gas meters cannot be enabled
(restored) from the Trio.
Top-up (20-digit code)
The Trio can be used to top-up the meter(s). In the prepay menu
select Top-up, if both meters are in prepayment mode, then select
the fuel to top-up.
You can top-up from the home screen prepayment tab by pressing
the fuel in prepayment mode- see “Prepayment screen” on page 15.
Once the code has been entered and sent, a conrmation screen
will appear as shown above.
To Next Page
Loading...
Need help?
General
