Getting started
8
Getting started
Meter connection
Each time the Display is turned on it will show Connecting to smart
meter... for up to 5 minutes while the Display connects to the smart
meter(s) in your home.
If the screen shows Lost Network, then you may need to move the
Display closer to your smart meter(s) to re-establish the connection.
Connection established
Once your Display has successfully established a connection to your
smart meter(s), your Trio will show the current consumption for
electricity and recent gas usage.
If your Display loses connection to the smart meter(s), then it
will show the alert above. Try moving the Trio closer to the smart
meter(s) to re-connect.