GeoMax EZiSYSTEM i Series User Manual

24EZiSYSTEM, How to Use the Locator
Peak hold
When activated peak hold will show the highest peak reading obtained during the pinpoint
process. The displayed reading can be adjusted between 0 to 5 seconds.
Detecting direction of the
service
1. Position the Locator directly
over the service.
2. Rotate the Locator on its axis.
3. The blade of the Locator will be
in line with the service when
the signal strength indicator is
at its minimum.

GeoMax EZiSYSTEM i Series Specifications

General

Brand	GeoMax
Model	EZiSYSTEM i Series
Category	Security Sensors
Language	English