5 Operation
The battery must be charged before using it for the first time.
☞
The batteries are inserted at the bottom of the Zenith60.
1. To remove a battery:
a) Push the slide fastener of the battery compartment in the
direction of the open-lock symbol.
b) Press the button to open the battery compartment.
2. Push the battery sideward to release the battery from its fixed
position.
3. Remove the battery.
4. To insert the battery, push the slide fastener of the battery com-
partment in the direction of the open-lock symbol.
5. Open the battery compartment.
6. Insert the battery into the battery compartment aligning the con-
tacts.
☞
Change battery
step-by-step
Operation 14
en
To Next Page
Loading...
Need help?
General
