22.2.4 Playback of Daylight Saving Time Events
On GV-System, you can retrieve the events recorded during the Daylight
or playback. You
r playback.
ions describe how to retrieve the recorded files from
the GV-IPCAM H.264 over network. If you like to use the memory card for
ayback Using the Memory
n follow Steps 4-5
ViewLog Server
from GV-System, click the Tools
button and select Remote ViewLog Service. The Connect to Remote
ViewLog Service dialog box appears.
3. Enter the connection information of the camera, and click Connect.
Once the connection is established, the video events will be displayed
on the Video Event list.
4. On the Date Tree, select the date of Daylight Saving Time. A separate
DST subfolder will be displayed as illustrated below.
Saving Time (DST) period from the GV-IPCAM H.264 f
can also connect the memory card to GV-System fo
The following instruct
playback, first follow the instructions in 22.2.1 Pl
Card to load the recorded files to ViewLog, and the
below to play back DST events.
1. The camera must allow the remote access with
activated. See 22.3.7 ViewLog Server.
2. To remotely connect to the camera
Figure 22-7
410
To Next Page
Loading...
Need help?
General