Born For FPV
Two conditions are required to unlock the rotating motor:
The throttle lever is in the lowest position
Turn the unlocking switch to the unlocking position
1. To unlock the motor, the throttle lever must be pulled to the lowest position,
otherwise when the unlock switch is turned, the motor will not have any action. When
the buzzer is installed there will be a warning :didididididi,di~,didi sound of a
warning,Indicates that the throttle lever is not in the lowest position
2. When the lock switch is set to the bottom gear, the motor turns. First gear up motor
locked
3. When landing, when the height drops to about 30cm from the ground, it can be locked
to complete the landing
The throttle is at the lowest
To Next Page
Loading...
Need help?
General
