Born For FPV
GEPRC Team Really Excitedly to released the GEPRC CineLog25 CineWhoop drone . All
innovations are disruptive for GEPRC CineLog25.
CineLog25 will be available in three versions: CineLog25 HD PRO, CineLog25 HD Nano, CineLog25
Analog.
The most noteworthy feature of CineLog25 is the lightweight quadcopter that can be shoot video
by GoPro Lite. It adopts the most popular backward push design on the FPV field at present. It can
effectively use the thrust weight ratio of propeller to obtain higher flight efficiency. In the overall
layout of the drone, we put VISTA HD in the center of the quadcopter, so that the center of gravity of
the quadcopter is in the middle, The propeller Inlet is smoother and the noise is lower. Redesigned the
shock absorption structure of the camera mount and GoPro Lite, Eliminated the jelly of the camera
and FPV camera
The F411-20A-F4 AIO and GEPRC GR1404 4500kv(Upgraded Version) motors are used in flight
system and power system. The power battery can be compatible with 450mah ~ 750mah.
The flight time of CineLog25 is around 5.5 minutes (it depends on the flying habits). The stable
electronic equipment and advanced frame materials make the quadcopter stable and can achieve all
FPV freestyle tricks easily
Features
1.New camera damping system
2.Brand-new exclusive pusher frame
3.Low noise optimization
4.Long range flight
5.Low center of gravity design
6.Perfectly Compatible with most of mainstream cameras
7.Using DJI HD Goggles
8.Adjustable lens angle
9.With EVA foam cushioning
10.Optimized bottom design
11.Camera power line output
Main parameter
Frame:GEP-CL25
Wheelbase: 109mm
Flight Controller:GEP-20A-F4
MCU: STM32F411
To Next Page
Loading...
Need help?
General
