GEPRC Cinelog25 - Transmitter Bind

Born For FPV
8
/18
Transmitter Bind
1. At the same time long press the recording key,custom key C and right wheel key of
the transmitter.When the transmitter makes drip sound and the status indicator LED
turns blue and flashes slowly, it will enter the bind state
2. Press the bind button at the AirUnit,and the status indicator LED will turn from
green to red, then the bind state will be entered
3. The transmitter indicator light changes from blue to green, and the AirUnit indicator
light changes from red to green,the bind is successful.
Right wheel
Custom key C
Recording key
Bind button
LED